1. Introduction

2. Preparation

• 2.1 Equipments
• 2.2 Hardware setup
  • Step 1 Environment setup
  • Step 2 Camera setup
  • Step 3 Capture test
  • Step 4 Compatibility test
• 2.3 UFOCapture setup
  • Step 5 Installation of UFOCapture
  • Step 6 Confirmation of the capture driver
  • Step 7 Previewing test
  • Step 8 Manual recording test
  • Step 9 Detection test
  • Step 10 Basic setting
  • Step 11 Profile setting
  • Step 12 Super impose setting
  • Step 13 Dark object mask setting
  • Step 14 Slow object mask setting

3. Observation

• Step 15 Detect area mask setting
• Step 16 Scintillation mask setting
• Step 17 Sensitivity tuning
• Step 18 Detection(Sample of all settings)
• Step 19 Check of results

4. Post processing

• 4.1 Object Analysis
  • Step 20 Installation of UFOAnalyzer
  • Step 21 Profile setting
  • Step 22 Manual measurement
  • Step 23 Analysis
  • Step 24 Check of analysis results.
  • Step 25 Manual correction
  • Step 26 Trail Map drawing
  • Step 27 Magnitude estimation
  • Step 28 Reporting
• 4.2 Orbit calculation of meteors
  • Step 30 Installation of UFOOrbit
  • Step 31 Collecting M.csv
  • Step 32 Find simultaneous observation
  • Step 33 Get Results

5. Advanced topics

• 5.1 PAL
• 5.2 IEEE1394
• 5.3 FTP setting
• 5.4 Cosmic ray observation
• 5.5 Slow object observation
• 5.6 TLE observation
• 5.7 External data input to UFOOrbit